Wave generation and measurement
Electronic high-voltage solid state multiplexers
Ciprian's multiplexers switch electronic signals between one common connector and many other connectors. These switches are bidirectionnal and are controlled via a USB2 link from a host computer.
A typical application for these products is, for example, in acoustic or ultrasonic experimental setups where the output signal from one single high voltage power amplifier has to be directed successively to different transducers and/or the echo signals from the different transducers have to be measured successively from one single scope or digitizer.
MUX multiplexers family
The CIPRIAN Model MultiplexeurHT High Voltage multiplexer switches electronic signals between one BNC connector (called 'common') and many other BNC connectors (called 'terminals').
The switch is bidirectionnal : the electronic signal can propagate from common to terminal or vice-versa.
Very low voltage signals − corresponding to an echo wave, for example − as well as very high voltage signals − corresponding to an excitation wave, for example − can be switched.
A typical application is the simultaneous study over a long period of eight different samples each with a slow evolution.
Prices are:
- for a unit with 1 common switchable to/from 8 terminals = 1 200 euros
Main advantages are:
- fast switching time
- no moving mechanical components
- very attractive price
- extended warranty of three years
Main specifications are:
- Sustain high voltage operation (up to 1 kiloVolt)
- Fully solid state design maximises the time of operation without failures
- Fast switching time
- Low cross-talk between channels : 80 dB isolation
- DC to 10 MHz working range
- USB2 link with the host computer
- Contacts -
- Legal Notice -
- Last modified: 04 March 2011 -
- © Ciprian Sarl.